Chat with us, powered by LiveChat
Velkommen til vår nye nettbutikk!
91 78 20 84
post@rc-deler.no
-47%
  • TRF 101 CHASSIS KIT

TRF 101 CHASSIS KIT

kr 3 790 kr 1 995

På lager

Varenummer:2-42252 Kategorier: ,
  • Beskrivelse
  • Omtaler (0)

Beskrivelse

This is the new TRF101 chassis kit designed for the ultimate Formula One R/C racing enthusiast. The data collected from TRF team member experience has provided this enhanced F1 chassis the best possible performance potential.

Based on the F104 Ver.II chassis, it has a longitudinal battery position, and features a carbon lower deck and lower brace. The rear suspension features a center pivot ball and L/R side links with pitch and roll dampers. Small adjustments can be made to the suspension with the use of different viscosities of oil and spring hardness.

The front suspension features a new one-piece carbon upper arm design which helps heighten cornering performance. A longitudinally-mounted positioned servo (must use low profile servo) enables precise steering feel, while the pivot-ball link rear suspension features 3 side link attachment positions for increased setting positions. Components such as integrated differential housing and carbon rear shaft, a wide aluminum motor mount and differential joints positioned closer to the chassis center were designed with feedback from the TRF (Tamiya Racing Factory) team. 

 

Set contents:

 

  • 3mmThick Carbon Lower Deck
  • 3mmThick Carbon Lower Brace
  • 3mmThick Carbon Body Mount Plate
  • 2.5mm Thick Carbon Front Upper Arm
  • 2mm Thick Carbon Motor Mount Rear Plate
  • Battery Plate
  • Aluminum Motor Mount
  • Aluminum Diff Housing A
  • Aluminum Clamp Type Wheel Hub (L)
  • Aluminum Suspension Mount
  • Aluminum King Pin Mount
  • Aluminum Servo Mount
  • Carbon Rear Shaft integrated with Diff Housing B
  • TRF Damper (HL Cylinder + Titanium Coated Shaft)
  • High-Efficiency Roll Damper
  • Hi-Torque Servo Saver
  • Aluminum Horn for Hi-Torque Servo Saver
  • Adjustable Metal Steering Uprights
  • Aluminum Finned Motor Spacer
  • Aluminum Turnbuckles
  • 04 Module Spur Gear (96T)
  • 04 Module Hard Coated Aluminum Pinion Gear (24T)
  • Fluorine Sealed Ball Bearings
  • Tungsten Carbide Diff Balls
  • Titanium Coated King Pins

 

ProductSpecifications  
   
Type Detail
Scale 01.okt
Constructiontype assembly kit
Terrainuse on-road 
Drive-train 2WD
Drivetype pinion to spur gear
Driveline solid axle
Differentialtype ball pressure plate
Suspension front kingpin coil springindependent suspension/solid axle rear
Steeringmechanism direct servo
Shockdamper oil-filled damper
Shockdamper material aluminum
Tiretype not included
Tiretread n/a
Bodymaterial not included
Chassismaterial carbon fiber plate
ElectronicSpeed Control (ESC)  not included
ESCmodel n/a
LEDLight buckets no
LEDlights no
Motor not included
Bearings shielded ball bearing
Adjustablecamber yes
Adjustabletoe angles front only
Adjustableground clearance yes
Adjustablegear ratio yes
Adjustablewheelbase fixed
Adjustabletrack width fixed
Adjustableshock angle yes
Specialfeature 1 Features newly-designed rearcarbon shaft, stoppers, motor mount, links & main chassis
Specialfeature 2 Uses aluminum HL roll frictiondamper and TRF damper for pitch and roll
Specialfeature 3 Rear suspension links may bepositioned in 3 settings
Specialfeature 4 Carbon fiber front upper A-arm
Specialfeature 5 Adjustable aluminum frontsteering uprights
Specialfeature 6 New Aluminum diff housing andleft hub carrier
Specialfeature 7 Low-profile servo and standardsize servo may be used
Specialfeature 8 1.5 and 2.5 camber angleadjustment
Specialfeature 9 Aluminum servo horn
Specialfeature 10 Carbon axle
RequiresA 2-channel radio gear 
RequiresB 7.2 battery & charger
RequiresC polycarbonate paint
RequiresD wheels, tires, body set, motor,esc

Omtaler

Det er ingen omtaler ennå. Skriv en omtale